The transport automatic polishing machine ensures foolproof and roughness handling
Views : 240
Update time : 2022-11-21 08:40:59
When we buy a new polishing machine equipment, we need to properly transport it to the destination, if you do not pay attention to it during this transportation, it is likely to cause damage to the polishing machine, so it is important to master certain transportation skills.
1, operate the electric box panel, before the transportation operation of the electric box panel loading needs to be on the front of the panel one or two foam plates, because the operation of the electric box panel is a vulnerable part of the automatic polishing machine, in order to prevent damage caused by collision during loading or transportation, so foam board is required.
2, equipment workbench, equipment table levelness directly affects the quality of polishing products, but often in the process of transportation greedy for convenience, put the parts on the workbench for transportation, but during the transportation of the vehicle constantly shake and turn, etc., the parts on the workbench will be damaged to the workbench, resulting in cracks or damage to the small parts on the workbench.
3, movable parts fixed, automatic polishing machine will be installed with robotic arms, automatic waxing device and other movable parts, must be fixed with rope or tape before loading.
4, equipment interval and fixation, a car is so large, most manufacturers will transport two or more units, but in order to avoid the friction between the equipment and the equipment during transportation caused by equipment damage, so the need for a buffer interval between the equipment, and use a rope to fix to avoid the above things.
In the polishing machine there are many products in the polishing process, most of the product surface has oxide layer, or the surface of the product is rough, if not first polishing, but directly polishing processing, in the polishing process takes a long time to achieve the surface polishing finish and roughness, this consumes resources, reduces production efficiency, and does not necessarily ensure the quality of the polished surface, therefore, encounter a similar situation should be roughness treatment first.
First use abrasive belt or sandpaper, milling cutter, file to grind the surface, and then grind and polish the product processing position, following the principle of coarse to fine.
1. According to observation, first of all, according to the product effect, choose the appropriate abrasive belt and polishing consumables.
2. The polishing of the product is to polish the surface of the product with a polishing wheel or polishing belt, which is a traditional manual operation that is more suitable for dealing with various irregular small pieces.
Metal grinding and polishing equipment
Polishing cloth wheel
Stainless steel round tube polishing machine purchase and use and working principle
How to pay attention to the maintenance of the automatic polishing machine when overhauling
