How to operate the polishing machine correctly and how to maintain it in summer
Views : 1697
Update time : 2022-11-22 09:01:09
The key to polishing operations in the polishing machine is to try to obtain a greater polishing rate in order to remove the damaged layer generated during the polishing process as soon as possible, and at the same time, the polishing damage layer must not affect the observed tissue, i.e. do not cause false tissue.
The former needs to use a coarser abrasive to ensure a higher polishing rate to remove the polishing damage layer, but the polishing damage layer is also deeper, the latter needs to use fine materials to make the polishing damage layer shallower, but the polishing rate is lower, a good way to solve this contradiction is to divide the polishing into two stages.
The purpose of rough polishing is to remove the polished damage layer, at this stage, the polishing rate should be reached, the surface damage caused by rough polishing is a secondary consideration, but it should also be as small as possible, the two is fine polishing (or polishing), the purpose is to eliminate the surface damage caused by rough polishing, and reduce the polishing damage to a small amount, the operation of the automatic polishing machine is relatively simple, the operator only needs to put the object to be polished on the corresponding fixture in advance.
Fix the fixture on the workbench of the automatic polishing machine, start the automatic polishing machine, the automatic polishing machine completes the polishing work within the set time, and then stops automatically, just remove the object from the workbench.
Before using the automatic polishing machine for polishing, you need to adjust the distance between the polishing head and the working surface, in order to achieve a good contact effect and throw a good effect, manual waxing can be used during the polishing process to reduce the machine production cost.
Summer is the rainy season, automatic polishing machine should avoid rain and exposure, which can increase the appearance life, long-term rain, rain immersion into the equipment contact parts, will induce polishing machine rust stains, so that the paint surface off, should pay attention to daily precautions, such as found rust stains in time elimination, if exposed to the sun at high temperature, because the polishing machine body is polishing machine steel design, heat absorption is strong, short-term temperature increase to more than 60 degrees, so that the equipment bearing part high temperature, causing grease overheating and melting, so that the rotating part lacks lubricating oil, Bearings shorten polishing machine life.
In order for the automatic polishing machine machine to work better, the daily maintenance of the polishing machine can not be ignored, considering the above problems, so will be under the machine platform, paint treatment, so that the paint surface is more durable, although the quality is good, daily maintenance is indispensable, master the maintenance of the automatic polishing machine, to extend the service life of the machine, bring greater benefits, effectively reduce investment is very important.
Automatic Polishing of Stainless Steel Bathroom Clips
Double-sided polishing machine for metal surface products
Small belt sander for round tubes
Automatic Belt Grinding Machine for Stainless Steel Door Hinge - Innovating Grinding Technology and Empowering Hardware Production
