Automatic polishing machine operation key points and reasons for poor polishing effect
Views : 348
Update time : 2022-11-19 09:10:42
The automatic polishing machine should pay attention to some key points when operating, so as to facilitate the stable work in the later stage.
First of all, try to achieve a large polishing rate in order to remove the damaged layer generated during polishing as soon as possible.
At the same time, it is necessary to polish the damaged layer so that the final observed tissue does not affect the final observation, that is, it does not cause false tissue.
Larger polishing rates require the use of coarser abrasives to ensure a larger polishing rate to remove the polished damage layer, but the polishing damage layer is also deeper, and the polishing damage layer requires the use of finer materials, so that the polishing damage layer is shallow, but the polishing rate is low.
There are many factors that affect the polishing effect of polishing machinery, including the quality factors of the polishing equipment itself and whether the operation of the operator of the polishing machinery is standardized.
First of all, for the specific polishing of the grinding and polishing machine, the choice of abrasive and polishing paste must be scientific and appropriate, should be according to the material, size or shape of the workpiece to choose different abrasives, for example, metal parts must use ceramic rough grinding, jewelry or non-ferrous metals need to soften the surface according to the actual plastic abrasive condition first, and then fine polishing, and according to the size and shape of the appropriate polishing abrasive body shape, here it should be noted that The size of the abrasive affects the actual working efficiency and the actual polishing quality.
Then, for the same material, grinding and polishing machine processing methods and methods are different, polishing abrasives are also very different, for example, casting, forging, stamping parts and other different processing methods will have an impact on the choice of abrasives to varying degrees, if the speed of the motor is too low, it is likely to be burned due to friction.
As for the arrangement of the process, it is necessary to carry out surface treatment, polishing test, aging test, etc.
Polishing machine is often used for surface polishing of various hard items, flame polishing machine is one of the automatic polishing machines, widely used, there are many uses.
It is especially suitable for the rapid and transparent polishing of rough sides, concave surfaces, inner holes, curved edges and other special-shaped corners of plexiglass (acrylic) advertising crystal characters or craft engraving products, solving the problems that ordinary throwing wheels cannot do.
It is suitable for rapid transparent polishing of fine burr edges of plexiglass products, and rapid flame polishing of acrylic wool sides of various material thicknesses, which is efficient and simple, and is also suitable for carrying the machine to the field environment for operation.