The YL-PM-03 milling machine is universal, suitable for many kinds of products milling and grinding. Suitable for different kinds of materials, such as metal, wood, stainless steel, copper, aluminum, brass, alloy, steel, iron, inox and so on.
Technical Parameters
| Item | The milling machine | The main motor - multi-speed three-phase asynchronous motors | Broadband three-phase asynchronous motors | Water Pump |
| Voltage | 380V, 50HZ | |||
| Power | 2.2/2.8 KW | 1.1 KW | 120 W | |
| Power Factor | COSφ 0.78 | |||
| Electric current | 5.7-6.7 A | 2.63 A | 0.39 A | |
| Frequency range | F.V.R: 30-60 HZ | |||
| Constant power frequency range | C.P.A.F.R: 50-60 HZ | |||
| Speed | 960-1400 r/min | 1410 r/min | ||
| Rated torque | RAT.TOR:7.0 N.m | |||
| Lift | 4 m | |||
| Flow rate | 25 L/min | |||
| Weight | 1.9-2T | 46 kg | 17 kg | |
| Size | 1540*1020*1680mm (L*W*H) | 500*390*340mm (L*W*H) | ||
| Triangle Zone | B1450 or B57 inch | |||
| Spindle speed | I(520,680,1350,3400rpm), II(1040,1360,2700,1700rpm) | |||
| Spindle bearings | 7210A, 5209, 6015Z | |||
| Max processing diameter | 100mm | |||
| Max processing length | 80mm | |||
| Y axis max travel | 140mm | |||
| X axis max travel | 120mm | |||
| Slow forward processing speed | 5-1500mm/ min | |||
| Fast forward processing speed | 2000mm/ min | |||
| Rotary angle of working table | ±45° | |||
| Hydraulic Maximum operating pressure | 40bar | |||
Application of milling machine.
1. The milling machine is universal, suitable for many kinds of products milling and grinding.
2. Specially use for glass door clips and watch case milling.
3. Suitable for different kinds of materials, such as metal, wood, stainless steel, copper, aluminum, brass, alloy, steel, iron, inox and so on.
4. This machine is wide range of uses, it can machining plane (horizontal, vertical), the groove (groove, T-shaped groove, dovetail slots, etc.), sub-toothed parts (gears, splined shafts, sprockets), helical surfaces (thread, spiral groove) and various kinds of surfaces. In addition, it can used for the rotator surface and inner hole machining,and cutting work.
Charicteristic of the universal milling machine.
1. Suitable for plane and irregular surface milling, also use for many kinds products milling, especially for door clips and watch case.
2. The milling machine equipped with computers program, and there are four sets of fixed program that allows users to choose Generation of machining programs freely.
3. Program control the hydraulic to promote multi-tool turret, ensure processing dimension accuracy and stability.
4. Extension units through the high-frequency processing, can increase the service life of the machine.
5. Working table can rotary for cone surface processing.
6. The hydraulic system maintained oil pressure at a least level during idling, thereby reducing the load of the oil pump, and save power.
7. Strong automated performance, use for mass production, save labor and time to achieve the production of high efficiency and excellent quality.
8. Simple operation safe, reliable, low noise, using machinery, electronics and hydraulic integrated control.
