Advantages of automatic polishing machine: how to replace the roller bearing the beam support
Views : 202
Update time : 2023-01-07 08:53:28
After all, the automatic polishing machine is a machine, which handles a lot of work faster than people, and its advantages lie in the following points.
1. Grinding method, the machine adjustment is unchanged, people will be tired and will deviate, 2. Working time, the machine will not be tired, people will be tired.
3. Loss, the grinding time control of the workpiece is unstable, each person's grinding method is different, the loss of the grinding wheel is fast, for irregular parts, holes, tubes and other dead angles, cracks, etc. can be polished.
Realize multiple effects such as deburring chamfering, polishing, washing, etc., variable frequency adjustment, 5. Meet various polishing needs, customized time, fast processing speed, simple and safe operation.
And can remind the polishing to complete, can be operated by one person multiple, voltage, current, frequency, time can be monitored, concise and clear.
Therefore, the operation of the automatic polishing machine is relatively simple, and the skill requirements for the operator are low, which can improve production efficiency, reduce labor intensity, save production costs, improve product quality, and reduce product quality differences.
Long service life or improper operation of personnel are the reasons for the failure of the polishing machine, and when the polishing machine fails, it will directly affect the use, so in order not to affect its normal use, it is necessary to carry out maintenance work in time, then, how to replace the roller support roller of the polishing machine.
1. Disassemble the support cover plate at both ends of the polishing machine, 2. Loosen the beam pressing mechanism, 3. Use the lifting tool to raise the beam, 4. Take out the worn roller row, replace the new parts, 5. Replace the lubricating oil in the support groove, 6. Reinstall the equipment.
Note: Due to the large workload and difficulty of replacement, and affect production, please pay more maintenance to the roller, replace the lubricating oil frequently, pay attention to waterproof and slag-proof, and extend the service life of parts.
It is necessary to regularly check the circuit of the polishing machine, if it is found that there is a problem with the circuit of the polishing machine, such as the exposed wire, the short circuit of the circuit, the damage of the device, etc., it needs to be replaced in time to prevent safety problems during the use of the polishing machine.
It is necessary to regularly check the various components of the equipment, whether it is reinforced or functional parts, need to be checked frequently, if there are loose parts to be able to be reinforced immediately, to prevent parts in the process of polishing machine work off off.
Metal grinding and polishing equipment
Polishing cloth wheel
Stainless steel round tube polishing machine purchase and use and working principle
How to pay attention to the maintenance of the automatic polishing machine when overhauling
